Ir para o conteúdo principal

Alterações no passo #3

Edição por Elizabeth Ofori

Edição aprovada por Elizabeth Ofori

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ***Remove the logic board.***
-[* green] Using one had to hold the device steady, use your free hand and get the Phillips #000 screwdriver to unscrew the four Phillips screws (as highlighted in the photo) from the logic board.
+[* blue] Using one had to hold the device steady, use your free hand and get the Phillips #000 screwdriver to unscrew the five Phillips screws (as highlighted in the photo) from the logic board.
[* black] Place the screws in a safe place and then carefully remove the logic board and set it aside.
-[* black] ****Note**** ''Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the picture. If the moisture indicator is red then the device has water damage.''
+[* icon_note] ''Take a note of the moisture indicator located in the yellow rectangle on the bottom of the device in the second picture. If the moisture indicator is red then the device has water damage.''

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado