Ir para o conteúdo principal

Alterações no passo #1

Edição por Kara

Edição aprovada por Kara

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ***Remove the RF shield.***
-[* black] With one hand holding the device in place, use your free hand to flip open the RF shield (which is the bronze metallic square with the green arrow pointing towards it located in the second picture).
+[* red] With one hand holding the device in place, use your free hand to flip open the RF shield (which is the bronze metallic square with the green arrow pointing towards it located in the second picture).
[* black] Peel off the three pieces of the silver metallic tape off of the logic board.
[* black] Do not peel off the two pieces of tape, that are located on the edge of the RF shield.
[* icon_caution] ''Try not to damage the tape or the RF shield because they will need to be reused when reassembling the device.''