Skip to main content

Alterações no passo #1

Edição por Walter Galan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blackicon_reminder] Flip the PlayStation 2 over so thatit lays with the bottom of the device is facing upupwards.
[* black] UsingUse the flat edge of a metal spudger,spudger to pry the 8eight flat screw covers out.
[* black] Remove the following 8 screwseight screws securing the top cover to the bottom case:
[* red] Four 55.4 mm Philips screws.screws
[* greenorange] Four 1818.0 mm Phillips screws.screws
[* blackicon_reminder] Flip the PlayStation 2 over so thatit lays with the bottom of the device is facing upupwards.
[* black] UsingUse the flat edge of a metal spudger,spudger to pry the 8eight flat screw covers out.
[* black] Remove the following 8 screwseight screws securing the top cover to the bottom case:
[* red] Four 55.4 mm Philips screws.screws
[* greenorange] Four 1818.0 mm Phillips screws.screws

Imagem 3

Versão Antiga

Nova Versão