Alterações no passo nº 3
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Pry up the battery |
|---|---|
| [* icon_note] The following four steps show how to remove the battery from a ***40 mm*** Apple Watch Series 6. | |
| [* black] Insert an opening pick between the battery and the Taptic Engine. | |
| [* black] Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the mainboard. | |
| [* icon_caution] Make sure you don't puncture or deform the battery, as it can catch fire and/or explode if damaged. | |
| [* icon_caution] Don't try to remove the battery all the way yet. It is still connected to the watch assembly. |