Pular para o conteúdo principal

Alterações no passo #1

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power settingsetting (or just '''thirty seconds''' if you're using the [guide|25705|newer gel-filled iOpener|new_window=true]).
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power settingsetting (or just '''thirty seconds''' if you're using the [guide|25705|newer gel-filled iOpener|new_window=true]).
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
[* black] Place the iOpener over the home button on the front edge of the display.