Pular para o conteúdo principal

Alterações no passo #1

Edição por Walter Galan

Edição aprovada por Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] You will be using an iOpener to transfer heat to the adhesive securing the home button assembly to the front glass panel assembly.
[*
black] Insert wisdom hereReheat the iOpener in the microwave for one minute on the highest power setting.
[* black] Lay the iOpener flat on the front side, near the bottom edge of the front glass panel assembly, smoothing it out so that there is good contact between the surface of the front glass panel assembly and the iOpener.
[* black] Let the bag sit on the front glass panel assembly for approximately 90 seconds before attempting to open the front panel
.
[* icon_note] You will be using an iOpener to transfer heat to the adhesive securing the home button assembly to the front glass panel assembly.
[*
black] Insert wisdom hereReheat the iOpener in the microwave for one minute on the highest power setting.
[* black] Lay the iOpener flat on the front side, near the bottom edge of the front glass panel assembly, smoothing it out so that there is good contact between the surface of the front glass panel assembly and the iOpener.
[* black] Let the bag sit on the front glass panel assembly for approximately 90 seconds before attempting to open the front panel
.