Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por Raymond Caulder

Edição aprovada de Raymond Caulder

Sem alteração

Linhas de Passo

[* black] Pull the logic board out with a pry stick gently from bottom to top at the current orientation.
[* red] The ribbon cable will be connected underneath the logic board. A small amount of force is required to disconnect them.
[* icon_caution] ''Although some force is required to lift up the board, be careful as to not bend any of the pins on either side.''
[* black] NOTE: Include more pictures of pulling it up.