Ir para o conteúdo principal

Alterações no passo #2

Edição por Sam Omiotek

Edição aprovada por Sam Omiotek

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Like the previous step, use your fingernail to press down the metal release lever for the ribbon cable connected to the motherboard.
+[* black] Use your fingernail to press down the metal release lever for the ribbon cable connected to the motherboard.
[* black] Use your fingers or a pair of tweezers to disconnect the ribbon cable by pulling on the black tab.
-[* black] Set the ribbon cable aside. You will need it during reassembly.
+[* black] Set the ribbon cable aside for reassembly.
[* icon_reminder] You do not need to press the metal lever when inserting the ribbon cable back in. You will hear a click once it is fully inserted.