Conserte seus objetos Comunidade Loja

Alterações neste passo

Edição por Mohamed Mohamoud —

Edição aprovada por Mohamed Mohamoud

Antes
Depois
Sem alteração

Linhas do passo

[* black] Reconnect all the valves again
-[* red] Now that you have connected the new compressor start device you need to use the screwdriver to put the guards back together and put the rear panel back on. When using the screwdriver twist to the left to make sure guards are tightly connected to the rear panels.
-[* black] Now you have completed all your tasks you need to re-plug the unit and test if the fridge works to make sure you've done everything properly.
+[* red] Use the screwdriver to put the guards back together and put the rear panel back on. Twist the screwdriver to the left to make sure guards are tightly connected to the rear panels.
+[* black] Then re-plug the unit and test if the fridge works to make sure you've done everything properly.
[* black] Should take 3 to 5 minutes