Alterações neste passo
Edição por Mohamed Mohamoud —
Edição aprovada por Mohamed Mohamoud
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Step 5- Put the new compressor start device | |
| [* black] Resemble your new compressor start device and make sure that it is secure. Then connect your new compressor start device to the tab then make sure that you position it on a compressor then line it up and press it into place. | |
| [* icon_reminder] Arrow in the last image shows where to connect the new compressor start device to. | |
| + | [* black] Should take between 2 to 3 minutes |