Conserte seus objetos Comunidade Loja

Alterações neste passo

Edição por Mohamed Mohamoud —

Edição aprovada por Mohamed Mohamoud

Antes
Depois
Sem alteração

Linhas do passo

[* black] Find the old composer start device
-[* black] After you are done with step 2 make sure to pull the line cord up when removing the rear panels.
-[* black] Once you remove the rear panel everything will usually be dusty. I highly recommend you remove the dust either with a vacuum or broom.
+[* black] Pull the line cord up when removing the rear panels.
+[* black] Once you remove the rear panel everything will usually be dusty. Use a vacuum or broom to remove the dust.
[* red] Remove the clip from the top of the compressor start device using the needle nose pillar.
[* black] Should take around 1 to 2 minutes