Alterações neste passo
Edição por Mohamed Mohamoud —
Edição aprovada por Mohamed Mohamoud
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] |
|---|---|
| + | [* black] Find the old composer start device |
| [* black] After you are done with step 2 make sure to pull the line cord up when removing the rear panels. | |
| [* black] Once you remove the rear panel everything will usually be dusty. I highly recommend you remove the dust either with a vacuum or broom. | |
| [* black] Remove the clip from the top of the compressor start device using the needle nose pillar. | |
| [* black] Should take around 1 to 2 minutes |