Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #7

Edição por Sam Goldheart —

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the edgeflat end of a plastic opening toolspudger to flip up the retainer securingretaining flap on the control boardheadphone jack/camera cable connector to its socket on the logic boardZIF socket.
[* black] Pull the connector away from its socketBe sure you are prying upward on the logic board.
[* icon_caution] Dohinged retaining flap, not lift the cable upward as you disconnect itsocket itself.
[* black] Use the edgeflat end of a plastic opening toolspudger to flip up the retainer securingretaining flap on the control boardheadphone jack/camera cable connector to its socket on the logic boardZIF socket.
[* black] Pull the connector away from its socketBe sure you are prying upward on the logic board.
[* icon_caution] Dohinged retaining flap, not lift the cable upward as you disconnect itsocket itself.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão