Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Sam Goldheart —

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] If present, use a plastic opening tool to help remove the piece of tape covering the end ofon the dock connector cablecable with a plastic opening tool.
[* black] If present, use a plastic opening tool to help remove the piece of tape covering the end ofon the dock connector cablecable with a plastic opening tool.
[* black] Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.
[* black] Peel the dock connector ribbon cable off the rear panel.