Conserte seus objetos Comunidade Loja

Alterações no passo nº 11

Edição por Muhammad Ali Malik —

Edição aprovada por Muhammad Ali Malik

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Now, it is time to check whether it the set screw has been tightened the right amount.
+[* black] Now, it is time to check whether the set screw has been tightened the right amount.
[* black] Place the fan so that the blades are facing you and pull the blades up gently.
-[* black] There should be very little movement when you perform this test. If there is none, the set screw is too tight.
-[* green] And Voila! You just fixed your wobbly fan and also learned how to disassemble it. Your fan should be working good as new now!
+ [* black] The blades should only lift a minuscule amount when you perform this test. If they do not move at all, the set screw is too tight.
+[* black] And Voila! You just fixed your wobbly fan and also learned how to disassemble it. Your fan should be working good as new now!