Ir para o conteúdo principal

Alterações no passo nº 6

Edição por Kristen Gismondi

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Close the case back by putting the plastic side panel back on.
+[* black] Put the plastic side panel back on.
[* black] Align the screw holes to the ones on the PC case.
-[* black] Screw in the screws in all four corners to hold the side panel in place.
+[* black] Screw in the screws in all four corners to hold the side panel in place using a Phillips screwdriver.