Alterações no passo nº 5
Edição por Vikshay Vuthavadoo —
Edição aprovada por Vikshay Vuthavadoo
- Antes
- Depois
- Sem alteração
Linhas do passo
- | [* black] Install the new ram stick in the same position that the previous one was |
---|---|
+ | [* black] Install the new ram stick in the same position that the previous one was in. |
[* icon_caution] There is a notch at the bottom of the stick, please make sure to align that with the notch that is located on the motherboard port to avoid damage to the board or the RAM. | |
[* black] Place the new module in the motherboard port and then apply some pressure for the prongs on the side to clip in the ram stick. | |
[* black] After the RAM module clicks into place, it is fully installed. |