Histórico do passo nº 3 do guia Masterbox Lite 5 Mid Tower Case RAM Replacement

Alterações no passo nº 3

Edição por Vikshay Vuthavadoo — 5 de out de 2020

	[* black] Open the case by unscrewing the plastic see-through side panel using a Philips screwdriver or unscrew with by hand.
+	[* black] The screw head diameter is 12mm, and the M4 Thread is 7mm long.
	[* black] There is one screw on each corner of the square panel.
	[* black] Lift the plastic side panel carefully and put it to the side.
	[* black] This will expose the main motherboard with all of its components such as the CPU, ram, graphics card, storage drive, power supply and cooling fans.
	[* icon_reminder] Put the screws away for later use when putting the see through panel back on.