Alterações no passo nº 5
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* icon_caution] Be careful near the corner, as the glass is very weak. Apply more heat at any time if the adhesive becomes stuck. |
|---|---|
| [* black] Leave an opening pick in the upper-right corner. | |
| [* black] Use another opening pick to cut the adhesive around the bottom-right corner. | |
| [* black] Leave that opening pick in the phone. | |
| - | [* icon_note] Use an iOpener, hair dryer, or heat gun to apply more heat as needed where you are cutting the adhesive. |
| - | [* black] The corners are where, if you are going to break the glass, this is where it will break. Go slow and apply heat liberally, and it will pull away. |