Alterações no passo #2
Edição por True Hines —
Edição aprovada por True Hines
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* icon_caution] Caution: Make sure to take care in prying case apart. There is a red wire that could get disconnected from the motherboard. |
| [* black] Gently seperate the two halves of the device, while taking care to not pull them too far apart, which could break the red wire that connects them. |
| [* red] To remove the circuit board from the right section of the device, unscrew the two 0.5 cm phillips head screws using a |
| [* red] To remove the circuit board from the right section of the device, unscrew the two 0.5 cm phillips head screws using a |
| [* black] When the screws have been fully unscrewed, use the tweezers to carefully remove them from the device. |