Alterações no passo #2
Edição por Parker Freudenberger —
Edição aprovada por Parker Freudenberger
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Gently seperate the two halves of the device, while taking care to not pull them too far apart, which could break the red wire that connects them. |
| [* black] Gently seperate the two halves of the device, while taking care to not pull them too far apart, which could break the red wire that connects them. |
| [* red] To remove the circuit board from the right section of the device, unscrew the two screws using a phillips head screwdriver. |
| [* black] When the screws have been fully unscrewed, use the tweezers to carefully remove them from the device. |