Alterações no passo nº 6
Edição por Navy Vet 2015 —
Edição aprovada por Navy Vet 2015
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Separate PCB | |
| - | [* red] |
| + | [* red] With the drive upside down, gently pull back on the ribbon cable retaining tabs and pull out the ribbon cable. |
| [* orange] There are 2 plastic tabs and 1 post holding the board in place. Lift up on the post, slide PCB to the left and then forward. | |
| [* icon_note] Reverse process to reattach PCB | |
| [* black] Rotate PCB right and place to the side | |
| [* yellow] There's just enough length in the cable to place the board in a PCB holder to replace capacitors. |