Alterações no passo nº 1
Edição por Ben Capehart —
Edição recusada por Carsten Frauenheim
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the screws securing the lower case | |
| [* icon_note] Before starting this procedure, you should disable your Mac's ***Auto Boot*** feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] to disable Auto Boot. | |
| - | [* |
| + | [* icon_note] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside. |
| [* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down. | |
| [* black] Use a P5 driver to remove the following screws: | |
| [* red] Two 7.9 mm screws | |
| [* orange] Two 7.1 mm screws | |
| [* yellow] Six 2.6 mm screws |