Histórico do passo nº 1 do guia MacBook Air 13" Retina Display 2019 Lower Case Replacement

Alterações no passo nº 1

Edição por Carsten Frauenheim — 5 de mai de 2021

	[title] Remove the screws securing the lower case
-	[* icon_note] Before starting this procedure, you must disable your Mac's *Auto Boot* feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide\|110034\|Use this guide\|new_window=true] to disable Auto Boot.
+	[* icon_note] Before starting this procedure, you should disable your Mac's *Auto Boot* feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide\|110034\|Use this guide\|new_window=true] to disable Auto Boot.
+	[* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
	[* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.
	[* black] Use a P5 driver to remove the following screws:
	[* red] Two 7.9 mm screws
	[* orange] Two 7.1 mm screws
	[* yellow] Six 2.6 mm screws