Alterações no passo nº 1
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the screws securing the lower case | |
| + | [* icon_note] Before starting this procedure, you must disable your Mac's ***Auto Boot*** feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot. |
| [* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down. | |
| [* black] Use a P5 driver to remove the following screws: | |
| [* red] Two 7.9 mm screws | |
| [* orange] Two 7.1 mm screws | |
| [* yellow] Six 2.6 mm screws |