Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por palbarede

Edição recusada de Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the hard drive/IR sensor cable assembly out of the upper case.
[* icon_note] If your replacement part does not come with the hard drive bracket and indicator light, you will need to pull those off of the part you are removing and install them: flip up the minute clamp lever, on clamp side opposite to orange ribbon, detach the orange ribbon, tear the new partadhesive.
[* icon_note] If your replacement part does not come with the hard drive bracket and indicator light, you will need to pull those off of the part you are removing and install them: flip up the minute clamp lever, on clamp side opposite to orange ribbon, detach the orange ribbon, tear the new partadhesive.
[* icon_reminder] Your replacement part may come with several adhesive foam bumpers. These are to ensure a snug fit of both bracket and hard drive. Apply only as needed.