Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Sam Goldheart

Edição aprovada de Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the hard drive/IR sensor cable assembly out of the upper case.
[* icon_note] If your replacement part does not come with the hard drive bracket and indicator light, you will need to pull those off of the part you are removing and install them on the new part.
[* icon_reminder] Your replacement part may come with several adhesive foam bumpers. These are to ensure a snug fit of both bracket and hard drive. Apply only as needed.