Ir para o conteúdo principal

Alterações no passo #1

Edição por jonathan12

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use a spudger to pry the fan connector straight up off the logic board. CAUTION: The black, rectangular plastic fan connector sits snugly in a black, rectangular plastic seat, into which it is plugged; when connected, these two pieces look like one piece. Take care to gently lift the connector up and out of its seat. Prying under this seat (as the image seems to indicate), instead of under the connector, will wrench the seat clean off the board.
[* black] Use a spudger to pry the fan connector straight up off the logic board. CAUTION: The black, rectangular plastic fan connector sits snugly in a black, rectangular plastic seat, into which it is plugged; when connected, these two pieces look like one piece. Take care to gently lift the connector up and out of its seat. Prying under this seat (as the image seems to indicate), instead of under the connector, will wrench the seat clean off the board.