Ir para o conteúdo principal

Alterações no passo #1

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use a spudger to pry the fan connector out of its seat, and straight up off the logic board.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
[*
icon_caution] The black, rectangular plasticfan socket and the fan connector sits snuglycan be seen in a black, rectangularthe second and third pictures. Be careful not to break the plastic seat, into which it is plugged; when connected, these two pieces look like one piece. Take carefan socket off the logic board as you use your spudger to gently lift the fan connector straight up and out of its seat. Prying under this seat itself, insteadsocket. The layout of under the connector, can wrenchlogic board shown in the seat clean offsecond picture may look slightly different than your machine but the fan socket is the boardsame.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
[*
icon_caution] The black, rectangular plasticfan socket and the fan connector sits snuglycan be seen in a black, rectangularthe second and third pictures. Be careful not to break the plastic seat, into which it is plugged; when connected, these two pieces look like one piece. Take carefan socket off the logic board as you use your spudger to gently lift the fan connector straight up and out of its seat. Prying under this seat itself, insteadsocket. The layout of under the connector, can wrenchlogic board shown in the seat clean offsecond picture may look slightly different than your machine but the fan socket is the boardsame.

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado