Alterações no passo nº 7
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the battery. | |
| [* icon_reminder] Be sure to remove the protective liner to expose the adhesive on your new battery before you set it in place. | |
| - | [* icon_note] If needed, try re-using the existing adhesive to secure the battery during reassembly. Alternatively, remove the old adhesive with high isopropyl alcohol and a lint free cloth and use a small piece of double-sided tape such as [product|IF317-072-1|Tesa 61395|new_window=true], or a dab of liquid adhesive such as [product|IF145-413-1|E6000|new_window=true]. |
| - | [* icon_reminder] If you need to install a new force touch gasket proceed with the screen removal guide. |
| - | [* icon_reminder] Continue with the adhesive guide in case you only want to replace the display adhesive and not the force touch gasket itself. |
| + | [* icon_caution] Do not reinstall a damaged or deformed battery, as doing so is a potential safety hazard. |
| + | [* icon_note] If you are reusing your old battery during reassembly, you can reuse the existing adhesive to secure the battery during reassembly. Alternatively, remove the old adhesive with high isopropyl alcohol and a lint free cloth and use a small piece of double-sided tape such as [product|IF317-072-1|Tesa 61395|new_window=true], or a dab of liquid adhesive such as [product|IF145-413-1|E6000|new_window=true]. |