Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Samuel Covert —

Edição aprovada por Samuel Covert

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Use a level to make sure the wall plate is straight horizontally against the wall. Then screw in the wall plate against the wall.
+[* black] To make sure the new thermostat is not crooked along the wall use a level on top of the plate to see if the base is horizontally straight. While holding the plate straight screw in both screws on the left and right side of the base place till it is fastened against the wall.