Alterações no passo nº 2
Edição por Navy Vet 2015 —
Edição aprovada por Navy Vet 2015
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Cooling Fan Cable |
|---|---|
| [* black] Remove the top shell, flip it over, and place next to lower shell | |
| [* icon_caution] The two halves are connected together via the cooling fan wire. BE GENTLE when separating them | |
| [* icon_note] In typical Microsoft fashion, they've made it complicated to remove the fan wire. Not only is it wedged between two transistors it's also adhered with an epoxy like substance. | |
| [* yellow] Using a craft knife, carefully cut through the epoxy to get the cable free. Work slowly and carefully. The thick substance and awkward angles make this a slightly tedious process | |
| [* icon_caution] ***Be VERY CAREFUL. You can easily cut the cable here accidentally. If you cut your red/black wires you'll have to patch them. "Slow is smooth, smooth is fast" *** |