Alterações no passo nº 2
Edição por Navy Vet 2015 —
Edição aprovada por Navy Vet 2015
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Remove the top shell, flip it over, and place next to lower shell |
|---|---|
| + | [* icon_caution] The two halves are connected together via the cooling fan wire. BE GENTLE when separating them |
| + | [* icon_note] In typical Microsoft fashion, they've made it complicated to remove the fan wire. Not only is it wedged between two transistors it's also adhered with an epoxy like substance. |
| + | [* yellow] Using a craft knife, carefully cut through the epoxy to get the cable free. Work slowly and carefully. The thick substance and awkward angles make this a slightly tedious process |
| + | [* icon_caution] ***Be VERY CAREFUL. You can easily cut the cable here accidentally. If you cut your red/black wires you'll have to patch them. "Slow is smooth, smooth is fast" *** |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado