Conserte seus objetos Comunidade Loja

Alterações no passo nº 8

Edição por Phodjanee Howard —

Edição aprovada por Phodjanee Howard

Antes
Depois
Sem alteração

Linhas do passo

-[* red] • Now take the cartridge and start pushing the cartridge cover where “H/C” is annotated into the socket opening with the “H/C” oriented as the previous cartridge.
-[* black] if the cartridge does not go all the way in until the same stop location, use the tool that came with the new cartridge to assist with pushing it in on the cover; this will ensure that you do not damage the new cartridge during installation
+[* red] Now take the new cartridge and start pushing the cartridge cover where “H/C” is annotated into the socket opening with the “H/C” oriented as the previous cartridge.
+[* black] If the cartridge does not go all the way in until the same stop location, use the tool that came with the new cartridge to assist with pushing it in on the cover; this will ensure that you do not damage the new cartridge during installation.