Ir para o conteúdo principal

Alterações no passo #6

Edição por Nadia Morando-Hernandez

Edição aprovada por Nadia Morando-Hernandez

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Remove the black strip of plastic between the case and disk drive.
-[* red] Gently pull back the ribbon wire and remove the disk drive.
+[* black] Take out the black plastic covering.
+[* black] Unplug the ribbon wire from the motherboard.
+[* black] Now take out the disk reader.
+[* black] Put in the new disk reader along with the black plastic covering and screw them into place.
+[* black] Plug the new disk reader into the motherboard.