Alterações no passo nº 9
Edição por Veronica Contreras —
Edição aprovada por Veronica Contreras
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Adjust the DIN setting on the toe piece by tightening or loosening the screw on the side of the bindings. |
|---|---|
| + | [* black] Adjust the DIN setting on the toe piece to your personalized setting by tightening or loosening the screw on the side of the bindings. |
| [* black] Look at the window on the top of the toe piece to see the current DIN setting. | |
| [* icon_caution] Skiing with a DIN setting that is too high can be dangerous. Use caution to not over-tighten the screw. |