Alterações no passo nº 3
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_reminder] The fingerprint sensor flex cable is glued onto the rear side of the screen with mild adhesive. In case you're having trouble to remove the flex cable, you can [guide|25705|apply an iOpener|new_window=true] to the front of the display to loosen the adhesive underneath. |
| + | [* black] Slide an opening under the upper end of the fingerprint flex cable. |
| + | [* black] Carefully work your way into the direction of the ZIF connector and use the opening pick to separate the fingerprint flex cable from the screen. |