Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por koolkid

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Using a metal spudger, separateblue] Carefully remove the audio board from the device. Begin inwireless assembly that runs along the middle, attop and left edge of the small slotZune.
[* icon_caution] The boardassembly is lightly glued to the device. Use caution, as some force will be needed, but too much force will damage the board.
[* black] Continue pryingRemove the board up until it comes loose fromassembly and the devicebattery as a unit.
[* red] Using a metal spudger, separateblue] Carefully remove the audio board from the device. Begin inwireless assembly that runs along the middle, attop and left edge of the small slotZune.
[* icon_caution] The boardassembly is lightly glued to the device. Use caution, as some force will be needed, but too much force will damage the board.
[* black] Continue pryingRemove the board up until it comes loose fromassembly and the devicebattery as a unit.
[* black] Remove the two boards and the battery as a unit.

Imagem 1

Versão Antiga

Nova Versão