Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #13

Edição por turey

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Using a metal spudger, separate the audio board from the device. Begin in the middle, at the small slot.
[* icon_caution] The board is lightly glued to the device. Use caution, as some force will be needed, but too much force will damage the board.
[*
black] Insert wisdom hereContinue prying the board up until it comes loose from the device.
[* black] Remove the two boards and the battery as a unit
.
[* red] Using a metal spudger, separate the audio board from the device. Begin in the middle, at the small slot.
[* icon_caution] The board is lightly glued to the device. Use caution, as some force will be needed, but too much force will damage the board.
[*
black] Insert wisdom hereContinue prying the board up until it comes loose from the device.
[* black] Remove the two boards and the battery as a unit
.

Imagem 2

Versão Antiga

Nova Versão