Pular para o conteúdo principal

Alterações no passo #1

Edição por Aaron Jacob

Edição aprovada por Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] With the case and battery removed from the mid framemidframe, begin removing all cables pluggedattached into mid boardthe motherboard.
[* icon_note] Place the device so the mid frame'smidframe's backside faces up. Start with the cable on the bottom left corner.
[* icon_note] With the case and battery removed from the mid framemidframe, begin removing all cables pluggedattached into mid boardthe motherboard.
[* icon_note] Place the device so the mid frame'smidframe's backside faces up. Start with the cable on the bottom left corner.
[* black] Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.