Ir para o conteúdo principal

Alterações no passo #1

Edição por Kyle Kern

Edição aprovada de Kyle Kern

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] With the case and battery removed from the mid boardframe, begin removing all cables plugged into mid board.
[* icon_note] Place the device such that the backside of the mid boardframe faces up. Start with the Cable on the bottom left corner.
[* icon_note] With the case and battery removed from the mid boardframe, begin removing all cables plugged into mid board.
[* icon_note] Place the device such that the backside of the mid boardframe faces up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.