Pular para o conteúdo principal

Alterações no passo #1

Edição por Alec Boyer

Edição aprovada por Alec Boyer

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] With the case and battery removed from the Mid-Boardmid board, begin removing all cables plugged into Mid-Boardmid board.
[* icon_note] Place the device such that the backside of the Mid-Boardmid board faces up. Start with the Cable on the bottom left corner.
[* icon_note] With the case and battery removed from the Mid-Boardmid board, begin removing all cables plugged into Mid-Boardmid board.
[* icon_note] Place the device such that the backside of the Mid-Boardmid board faces up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.