Pular para o conteúdo principal

Alterações no passo #1

Edição por Isabelle Burgess

Edição aprovada por Isabelle Burgess

Sem alteração

Linhas de Passo

[* icon_note] With the case and battery removed from the Mid-Board begin removing all cables plugged into Mid-Board.
[* icon_note] The backside of the Mid-Board facing up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up white locking cable tensioner and slide flex cable out.
[* black] Proceed to the next closest small cable and repeat.