Alterações no passo nº 2
Edição por David Zhuo —
Edição aprovada por David Zhuo
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] When the lid is removed from the RAM Module compartment, you should see several sticks of RAM. |
|---|---|
| - | [* red] Remove these RAM sticks by pushing the metal tabs outward so that the sticks pop up. |
| - | [* icon_caution] ***When pulling the sticks out, do not yank the sticks with too much force! You don't want to break your RAM.*** |
| + | [* black] When the lid is removed from the RAM module compartment, you should see several sticks of RAM. |
| + | [* red] Remove these RAM modules by pushing the metal tabs outward (located on the sides of the modules) so that the RAM pops up. |
| + | [* icon_caution] ***When pulling the modules out, do not yank them with too much force! You don't want to break your RAM.*** |
| + | [* black] Replace the RAM module by sliding it into the angled socket. |
| + | [* black] Once securely inserted, gently apply downward pressure until the metal tabs on the sides click into place. |