Alterações no passo nº 11
Edição por Arielle Sampson —
Edição aprovada por Arielle Sampson
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use a heat gun to lightly heat the edges of the phone's screen to soften the adhesive that connects the display to the rest of the frame. |
|---|---|
| + | [* icon_caution] An iFixit iOpener, hair dryer, or hot plate can also be used to heat the edges. Using a heat gun, hair dryer, or hot plate will make the metal frame rather hot to the touch, so handle it with care. |
| + | [* icon_caution] Be careful not to overheat the device –the OLED display, battery and other internal parts can be damaged by excessive heat. Approximately one minute should be enough to soften the adhesive. |
| + | [* icon_note] An iFixit iOpener, hair dryer, or hot plate can also be used to heat the edges. Follow the [guide|25705|iOpener Heating guide] for instructions on using the iOpener. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado