Alterações no passo nº 1
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_caution] Power your phone off before you begin. |
| + | [* black] If possible, drain the battery before disassembly. When the battery is charged, there's increased risk of a dangerous thermal event if the battery is overheated or damaged during repairs. |
| + | [* black] If your display is cracked, completely cover it with packing tape to contain the glass shards and avoid injury. |
| + | [* black] [guide|25705|Prepare an iOpener|new_window=true] and heat the front of the phone along its left edge for about two minutes, or until it's slightly too hot to touch. This will help soften the adhesive securing the display. |
| + | [* icon_note] You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating. |
| + | [* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage. |