Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #18

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] On this side of the PCB, there are two PH00 screws that hold the Camera LenLens in place. Remove these screws to release the camera lensCamera Lens
[* black] The camera lensCamera Lens is motorized. There is a control wire and connector for the camera lensCamera Lens. Remove the cameraCamera Lens wire from the connector, and pull the camera lensCamera Lens free to reveal the 2K QHD Camera Sensor
[* black] On this side of the PCB, there are two PH00 screws that hold the Camera LenLens in place. Remove these screws to release the camera lensCamera Lens
[* black] The camera lensCamera Lens is motorized. There is a control wire and connector for the camera lensCamera Lens. Remove the cameraCamera Lens wire from the connector, and pull the camera lensCamera Lens free to reveal the 2K QHD Camera Sensor
[* black] Components:
[* orange] 2K QHD Camera Sensor - Not marked
[* yellow] [http://www.excelitas.com/Downloads/PYD1588Datasheet.pdf|PYD1548/7660 Excelites Tech Low Power Motion PIR Sensor]