Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #9

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] There are two more PCBPCBs in the camera face assemble. The Top PCB is held in place with via a zero force insertion connector. A Spudger Tool can be used to remove the Top PCB by gently pryprying the Top PCB loose near the zero force insertion connector, and working your way around the outside the top PCB prying it loose further with the Spudger Tool
[* black] There are two more PCBPCBs in the camera face assemble. The Top PCB is held in place with via a zero force insertion connector. A Spudger Tool can be used to remove the Top PCB by gently pryprying the Top PCB loose near the zero force insertion connector, and working your way around the outside the top PCB prying it loose further with the Spudger Tool
[* black] The Siren/Speaker is also connected to the Top PCB and can be unplugged.