Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #7

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] The microphone on the PCB removed in the last step is held in place with a rubber gasket, and connected via flex cable
[* black] To remove the Microphone, Use a Spudger Tool to flip up the retention clip that holdholds the flex cable in place, and gently pop the microphone gasket from the PCB
[* black] The microphone rubber gasket can be removed to revealseparated from the Microphone used in the Arlo Pro 3 Camera
[* black] The microphone on the PCB removed in the last step is held in place with a rubber gasket, and connected via flex cable
[* black] To remove the Microphone, Use a Spudger Tool to flip up the retention clip that holdholds the flex cable in place, and gently pop the microphone gasket from the PCB
[* black] The microphone rubber gasket can be removed to revealseparated from the Microphone used in the Arlo Pro 3 Camera
[* black] The Microphone is a [http://vespermems.com/products/vm1010|Vesper VM1010 Wake-On-Sound MEMS Microphone]