Ir para o conteúdo principal

Alterações neste passo

Edição por Frankie Guzman

Edição aprovada por Frankie Guzman

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_caution] Do not touch the motherboard while the battery is connected to avoid short circuits.
[* icon_note] Verify that all the rear cover screws have been removed.
[* black] Gently remove the CD-ROM by using a plastic pry tool and sliding it out of the laptop housing.
[* red] Now using the pry tool, gently pry open the back panel of the laptop. Slowly working around the housing with gentle pressure.
+[* icon_caution] Do not touch the motherboard while the battery is connected to avoid short circuits.
[* orange] With the cover removed, locate the battery and the six 5mm screws.